Version 2.3.8 09-14-2022 - Fix Preview for SureThing 7 files - Fix Security Vulnerability Version 2.3.6 05-03-2022 -Fix Security Vulnerability -Fix Automatic Updates to properly check new update location Version 2.3.4 07-25-2017 - BDXL Blu-ray support added - PTProtect Module updates and fixes - Additional cartridge type support added - other fixes and updates Version 2.3.2 12-21-2016 - added new errors that were previously reported incorrectly - added the latest PTRobot files (1.7.2) which includes a fix for updating the SE-3 and 4200 OEM number if not set Version 2.3.1 11-30-2016 - PTPNE: Fixed Bug sending jobs to a server when PTPublisher is used as the network client. Job would go to queued state but never start. Version 2.3.0 11-4-2016 - added support for the 4200 Series - updated to allow low ink warning on 4200 and SE3 - fixed a ui issue in the manual movements test if there was an error - added ability to cancel and kill alignment needed for SE3 and 4200 - changed the full robotics test to better display errors and stopping of the test - added a cancel button to the alignment dialog - added new splash and about pictures - corrected some logic for picking problems during alignment print - corrected some status output during alignment or clean print due to not being able to get status with a print in the queue - PTPNE: fixed a crash with pre-checking of cartridge/s on a network robot - added a warning when the user clicks go and the cover is open and the disc count is unknown - changed so the 4200 centering print is sent down the kiosk chute in PTPublisher - added a delay in the calibrate robot dialog between closing and opening the drive for manual movements - changed the name of the cartridge displayed in ink low dialog - now if we can't get the driver logs it will still create the tech support report - PTPNE: fixed a crash that could occur with PTPNe - PTPublisher will copy network files locally when the service is running on the same computer as PTPublisher - PTPNE: changed to not allow sending another network job while one is being sent (was causing a crash) - now storing the drive serial number/s in the flash without a leading or trailing space character JobManager 1.4.6 - fixed bug where PTP would not allow use of internal PC optial drive for copy/image jobs Version 2.2.6 06-15-2016 __________________________________________________________________________ - added Bravo SE-3 support - now creating the crashes folder for unhandled exception reporting - fixed a problem with clicking go with no robot found - added a check when clicking go to detect if the robot has reported no status for 5 consecutive times - added the 1.6.5 PTRobot files JobManager 1.4.4 - added "No Status" to the status XML for detecting no robot in PTPublisher during job submition - fixed a problem with drive and job status displayed in certain languages - fixed the about dialog display issue - now signing the PTPublisher.exe file so if it needs to be elevated to run it doesn't have an unknown publisher - fixed a problem with loading strings that were not in the string table which was causing an exception in PTPublisher - updated to .net 4.5 (XP/Vista OS versions are no longer supported) - Changed the auto Update Tool - fixed some minor bugs and unhandled exceptions - Fixed MSVCR.dll is Missing Error - updated to depend on the 2013 c++ runtimes during install using the bootstraper - fixed bug in audio projects where audio files (wav, mp3) would appear with a 0:00 track length and then cause an error during the burning process. Release Notes - PTPublisher: Version 2.2.1 -10-16-2015 __________________________________________________________________________ - updated for faster BD-R (blu-ray) burn times - updated to latest PTRobot 1.6.3 - fixed KB article link and search - added new burn engine 5.08.34.1 Release Notes - PTPublisher: Version 2.2.0 -07-16-2013 __________________________________________________________________________ - added print head life percent data for 4100 series (Does not work in PTPublisher Network edition) - updated to PTRobot version 1.6.2, Job Manager version 1.4.1, Job Processor 3.4.5 - updated to PTProtect DVDx.dll version 5.0.24.3 - updated burn engine to version 5.08.13.0 - updated to show warning on SureThing 3 file Bug 1591 - changed message during calibration for 4100 series Bug 1448 - updated to show copy temp path in options dialog Bug 1476 - updated to show volume name on copy job if we can get it Bug 162 - fixed a crash on launch with French as the user language Bug 1543 - removed predefined media for printing - Bug 1507 - updated calibration utility to work with the Bravo II Bug 1376 - fixed a potential bug for drive serial number comparisons Bug 1569 - fixed so it should launch PTPAdmin if on 64-bit OS (PTPublisher Network Edition) - Updated for drives with special characters in serial number (JobProcessor 3.4.5) Release Notes - PTPublisher: Version 2.1.9 -03-19-2012 __________________________________________________________________________ NEW FEATURE: 1391 Fixed Rights issue with drive enumeration at startup. If we cannot get the Drive serial number via IO Control (due to ACCESS_DENIED on CreateFile)then we will attempt to get it via the burn engine. NEW FEATURE: Added message to drive selection dialog if drives are programmed in the ini - Not all drives in the Publisher were found!... Error will appear if one or both drives are not seen. This will replace drive picker screen that did not make sense since only the PC drive was available. NEW FEATURE: Updated Sonic Burn engine to version 5.02.18.0 BUGFIX: Fixed a bug where an X in the drive INI file would cause continuous drive enumeration issues with a drive that had an x in the serial number. BUGFIX: Some languages Danish weren't displaying the drive enum window properly BUGFIX: 1396 Fixed German translation issue with Open/Close BUGFIX: Changed 1309"Clean Cartridges" to "Clean Printhead/Cartridges" BUGFIX: 1200 Made Restore Factory Defaults work on the 4100 Series. BUGFIX: Fixed an issue with strings for non supported languages showing up as Unknown in the splash screen and the drive selection. Release Notes - PTPublisher: Version 2.1.8 -11-16-2011 __________________________________________________________________________ - Added a function to copy the correct PTProtect dll files depending on the dongle version installed. - Updated PTRobot DLLs to address print stalling issues on very slow PCs - Made the shortcut to PTP have the run as administrator option in the context menu. - Bug Fix: 1374 If media type setting in job file doesn't exist in PTPublisherSetting.xml crash occurs. This can happen if a media type was created, saved to a job, and then settings xml is deleted during reinstall or during troubleshooting. - Bug Fix: 1369 Help files are not installed - Bug Fix: 1338 Remove "No to all" button on dialogs where it did not apply. - Bug Fix: 1323 PTPublisher does not warn for low ink during job when using 4100 robot. - Bug Fix: 1312 Cannot change volume label on DVD Video Jobs. - Bug Fix: 1306 Display issue on ink cost calculation dialog. - Bug Fix: 1142 Display issue in Job failed dialog. - Added support for new Robot type (4051) - Added new drive setting/checking in calibration utility. - Added new ink low dialog on 4100 series - Adjustable Ink low level setting (double click the ink icon in PTP) will appear for 4100 series in the printer settings dialog - That level will be used for warning at start of job and within job Release Notes - PTPublisher: Version 2.1.6 - 4-25-2011 __________________________________________________________________________ Tested and verified working with robots Bravo II, SE, XR, Pro, XRP, Xi, 4100, 4100XRP File Version Updates: PTPublisher.exe 2.1.6 (changed) PTPublisher.exe.config PTJobManager.dll 1.3.9 (changed) PTJobManagerStrings.dll 1.0.3 JobProcessor.dll 3.4.2 (changed) PTRobot.dll 1.5.8 (changed) PTRobot4100.dll 1.5.8 (changed) PTRobotDPse.dll 1.5.8 (changed) PTRobotDP.dll 1.5.8 (changed) PTRobotDPPRO.dll 1.5.8 (changed) Release Notes - PTPublisher: Version 2.1.5 - 4-11-2011 __________________________________________________________________________ Bug Fix: Network and local jobs now use the same disc/cartridge pre job checks New Feature: Added support for Bravo4100 XRP Bug Fix: Now works with client/server on same machine Bug Fix: Removed icon in Robot status section of explorerbar Bug Fix: Added extra logging in PTPTrace Bug Fix: DriveInfo dialog now talks directly to PrimoSDK bypassing JobManager/JobProcessor Bug Fix: PrinterSettings: Fixed UI for 1 cart New Feature: Added Projects Set to Advanced Projects Bug Fix: Removed warning on next button when data won't fit on disc. Bug Fix: Only allow spanning on local robot. Bug Fix: Fixed DVD-Video Job Bug Fix:Allow internal drive to be used on image jobs (local and network) Bug Fix: Write DRIVE SERIAL in flash when using calibration utility Bug Fix: allow project sets to work on network version Bug Fix: Copy Job/Audio Track Info/Image File Info now use PrimoSDK directly Bug Fix: Fixed an issue where multiple entries could get into the image/dvd video combobox Bug Fix: Added a message box on 4100 & 4100XRP when launching the calibration (set offsets) utility File Version Updates: PTPublisher.exe 2.1.5 (changed) PTPublisher.exe.config PTJobManager.dll 1.3.9 (changed) PTJobManagerStrings.dll 1.0.3 JobProcessor.dll 3.4.2 (changed) PTRobot.dll 1.5.7 (changed) PTRobot4100.dll 1.5.7 (changed) PTRobotDPse.dll 1.5.7 (changed) PTRobotDP.dll 1.5.7 (changed) PTRobotDPPRO.dll 1.5.7 (changed) Release Notes - PTPublisher: Version 2.1.4 - 1-21-2011 __________________________________________________________________________ New Feature: Added Project Set Interface. Save multiple projects as a set. New Feature: Added additional print settings to Add a print file screen: Cartridge, Saturation, Color Mode, Color Table New Feature: Added Support for Disc Publisher 4100 New Feature: New Look, Updated interface New Feature: Added Advanced Printer Settings area accessible by clicking "i" on Add a print file screen or at any time by clicking on the ink level icons: Clean Cartridge, Center Print image, Change cartridges Calibration and Cartridge Cost. New Feature: Built in cost calculation in Advanced Printer Settings. New Feature: Updated Tech Support report to work better with Windows 7. New Feature: Added auto updater/Checker available from Help - Check for Updates. New Feature: Added Job Save box on Summary screen before a job is submitted. New Feature: 1084 - Added ability edit the folder structure of a data project. New Feature: Added ability to change the default image location for copy projects. Tools - Options - App Paths. New Feature: Updated Calibration utility with several more built in calibrations for new products - Xi and 4100. Bug Fix: Updated PTRip to work with latest versions of Windows Media Player and iTunes Bug Fix: 976 - Disc Spanning for BDR and DVD DL now works. Changed max sector values for all disc types to be more conservative to prevent job failures. CD = 359845 DVD = 2298496 BDR25 = 12219392 BDR50 = 24438784 DVDDL = 4173824 Values are editable in PTPublisherSettings.xml Format: CD_MAX_SECTORS, DVD_MAX_SECTORS, DVDDL_MAX_SECTORS, BR_MAX_SECTORS, BRDL_MAX_SECTORS Bug Fix: 384 - Log now shows sizes in MB instead of sectors. Bug Fix: Burn engine update to 4.26.8.0 Bug Fix: 872 - Audio projects using MP3 or WMA would sound scrambled if burning to two drive systems - FIXED Bug Fix: 894 - Copy project may fail if bin selection is enabled - FIXED Bug Fix: 919 - Updated PTProtect dll to 5.0.19.14 Includes many bug fixes and compatibility updates. Bug Fix: 923 - PTP reports the wrong ink level for 53335 cartridge in Bravo SE uses 53332 values - FIXED Multiple additional bug fixes. File version updates: PTPublisher.exe 2.1.4 PTJobManager.dll 1.3.8 PTJobManagerStrings.dll 1.0.3 JobProcessor.dll 3.4.1 PTRobot.dll 1.5.6 PTRobot4100.dll 1.5.6 PTRobotDPse.dll 1.5.6 PTRobotDP.dll 1.5.6 PTRobotDPPRO.dll 1.5.6 PTRobotStr.dll 1.1.2 PXSDKPLS.dll 4.26.08.0 MPTRobot.dll 1.0.7 Release Notes - PTPublisher: Version 1.4.6 - 06-16-2010 _____________________________________________________________________ Fixed Bug: Printing JPG, BMP or TIF files was not working on non English versions of Windows. Fixed Bug: Fixed bug that did not allow PTPublisher to be used as a network client. File version updates: -PTPublisher.exe 1.4.4 -JobProcessor 3.2.3 -PTRobot 1.4.7 Release Notes - PTPublisher: Version 1.4.5 - 06-07-2010 _____________________________________________________________________ Fixed Bug: Fixed problems with drive recognition. On some computers drives would not be found by the PTPublisher software. Top and Bottom drive locations now write to C:\Documents and Settings \All Users\Application Data\PTI\PTPublisher\Drives.ini Update Calibration utility to allow any drive on system to be picked as Publisher drive. Added eSATA compatibility for Blu-ray drives. Fixed Bug: Fixed problem printing JPG files on Windows 7 64 bit computers. Print file would print a thumbnail of image on the corner of the disc. Fixed Bug: Bin Selection was not working for Image Project, DVD Video Project or Copy Project. Added Disc Type drop down to each job type. Fixed Bug: PTProtect was not working with DVD DL discs. Fixed. File version updates -PTPublisher.exe 1.4.3 -JobProcessor 3.2.2 -PTRobot 1.4.6 -PTJobManager 1.2.1 -CalibratePublisher 1.8.0 Release Notes - PTPublisher: Version 1.4.3 - 04-14-2010 _____________________________________________________________________ Fixed Bug: Critical Update - In some cases PTPublisher would not correctly report the ink levels for a Bravo SE using the high yield 53335 cartridge. Updated Burn Engine to version 4.22.19.0. Release Notes - PTPublisher: Version 1.4.2 - 11-18-2009 _____________________________________________________________________ Fixed Bug: Critical Update - For BravoPro or BravoPro Xi2 in rare cases, the bottom drive would be loaded with multiple discs until the right bin was empty causing a job ending error. Release Notes - PTPublisher: Version 1.4.1 - 11-11-2009 _____________________________________________________________________ Fixed Bug: Optical Drive recognition problems in Windows 7. Specifically, when opening PTP you are prompted to choose which Publisher drive tray is open. However, the drive in your PC is the drive tray that opens. Release Notes - PTPublisher: Version 1.4.0 - 11-03-2009 _____________________________________________________________________ 256: Fixed Bug: Fixed several robot error handing bugs. 821: Fixed Bug: queuing of the same named job twice causes crash. 841: Fixed Bug: Drive not Ready Error 862: Fixed Bug: Audio pregap settings work intermittently for certain saved projects. 409: New Feature: Add create image button to first screen of Burn Disc from Image Project. 525 Fixed Bug: Print only in Kiosk Mode does not switch to left bin (BravoPro) 576: Fixed Bug: Installer fails in several instances because of vb scripts being blocked or failing. 534: Fixed Bug: Other Project Create a Disc Image crashes Fixed Bug: Logging Queue Overflow - Fixed Windows registry rights issue. Fixed Bug: Drive recognition issues on PTP start up - Fixed Windows registry rights issue. Updated Burn Engine to version 4.20.13.0. Updated icon graphics and splash screen. New Feature: Span Discs. New Feature: New project type - Back up job. New Feature: New project type - Rip Audio CD. New Feature: Add Ability for AutoPrinters to use Print Only project through PTPublisher. New Feature: Add standard disc template option to Print step. Release Notes - PTPublisher: Version 1.3.2 - 4-30-2009 _____________________________________________________________________ 605: Added default Pregap setting under Tools - Options. 607: Added Czech Language support. 451: Fixed Bug: Disc to Disc copy of DVD+R DL media failing with Media Invalid error. 396: Fixed Bug: Opening the calibration utility while in a 2 byte language open English version only. 549: Fixed Bug: Maximum number of copies was limited to 100 when some robots were connected. Fixed - Max is now 1000 550: Fixed Bug: Print only jobs do not respond to Bin Selection settings 552: Fixed Bug: Sound settings do not allow you to set the sound value back to none 513 New Feature: Add ability to type data path manually in file open dialog address bar. Fixed drive resolution problems with single drive robots on certain computers. Updated Burn Engine to 4.16.09.3 Added mixed Blu-ray / DVD drive support on XRP and DP Pro. Release Notes - PTPublisher: Version 1.3.1 - 12-16-2008 _____________________________________________________________________ Added 64 bit Windows Vista and Windows XP support. To use PTP on a 64 bit system you will also need to download the 64 bit driver for the Disc Publisher version 1.30 or higher. Updated PTProtect module to be compatible with more disc types and fix minor bugs. 235: Fixed Bug: On some computers the file open dialog would open underneath the main PTP window and would open very slowly. Also fixed other bugs associated with the file open dialog. 598: PTP NE Client: Fixed Bug: PTP NE client will now work with SureThing files that have merge fields. PTP detects if the SureThing file has a merge field and send the STD file to the server instead of a BMP. Note: If a SureThing file with Merge is used in a job sent to the server make sure that fonts used in the SureThing file exists both on the client and Server computers. If fonts do not exists on both computers, automatic substitutions will occur with random results. Release Notes - PTPublisher: Version 1.3.0 - 9-15-2008 ___________________________________________________________________ 575: Updated Burn Engine to 4.10.35.500 561: Bug Fix: After a few burns PTP stops without error or gives error 31 - Drive not ready on all subsequent disc. The new burn engine fixes this. 500: Bug Fix: Fixed Disc Information area on Recorder Information screen to display sizes in MB instead of sectors and show disc manufacturer. 529: New Feature: Add PTProtect DVD Video copy protection ability - Updated Help file with new PTProtect section. 549: Maximum number of copies was limited to 100 when some robots were connected. Fixed - Max is now 1000. 438: Bug Fix: Right Click in Audio job track screen - not on a track - click Set Pregap - Software crashes. 452: Bug Fix: SureThing files upgrade from version 3.xx do not show a preview of the file on the Print screen. 455: New Feature PTPNE: Add link in PTP client software to PTP Admin Utility. 460: Bug Fix: AutoRun or AutoPlay attempts to play the disc after it has been burned. PTP now disables autorun while PTP is open. 464: Bug Fix: Sending job to Bravo XRn from PTP NE client would crash client in some cases. 465: Bug Fix: PTP no longer prompts to change cartridges at the beginning of the job if you set you number of copies higher than the estimated copies printable with the installed cartridge. It now states "It appears that the color and black cartridge may not have enough ink to perform the job. Are you sure you want to continue?" 466: Bug Fix: If both bins are filled with disc and the unit is not in Kiosk mode PTPublisher now warns the user to remove discs from the output bin. 309: Bug Fix PTPNE: Changing Robots while data was being sent to the server crashes the program. 437: Bug Fix: Low ink warning not working for Bravo II. 000: Bug Fix: Several iterations of the Failed to initialize job manager (Invalid Drive) error message were fixed. This error will still correctly appear on computers where the DVD drive in the Disc Publisher is not detected by Windows. 000: New Feature: Updated layout of error message display screens to show error and a helpful tip that if followed may prevent the error in the future and added other improvements. 000: PTRobot updated to 1.3.7 Release Notes - PTPublisher: Version 1.2.4 - 6-05-2008 _________________________________________________________________ 000: Bug Fix: Updated PTRobot.dll files to 1.3.5 to fix "Unable to Initialize Job Manager (Invalid Drive)" error at PTP Start up. This version only fixes the error if the Disc Publisher unit connected has Pioneer DVR 215 drives. Release Notes - PTPublisher: Version 1.2.3 - 4-28-2008 _________________________________________________________________ 000: New Feature: Added network client capability. - To enable this feature check the "Search for Network Robots" box on the Change Robots Screen. 434: Bug Fix: Fixed bug that caused some DVDs created via DVD Video Disc method not to play back on older model Stand Alone DVD Players. 000: Bug Fix: Fixed bug that caused some Dual/Double Layer DVD-DL/DVD+DL discs copied via Disc Copy or Global Image method to fail at the beginning of a burn with an error message - "The media is invalid" 000: Bug Fix: Fixed bug that caused the instructions for changing the cartridges to always appear in German. These instruction now appear in the same language that is selected for the application. Release Notes - PTPublisher: Version 1.2 - 1-31-2008 _________________________________________________________________ 100: New Feature - When creating an Image it will now ask you if you would like to use this image in an image job. If you say yes it will automatically start an image job and add the image you just created. 239: New Feature - Additional translations of the software have been added - Chinese, Tranditional Chinese, Japanese, and Korean. 263: New Feature - You may now choose to create ISO images by using the Create Disc Image project and choosing the iso type after you Browse to the location you would like to save the image. 279: New Feature - When attempting to access an XRn using the PTP Client you can now enter the computer name directly in the Change Robot Dialog instead of searching. For some customers searching their network for the XRn was taking an excessive about of time. 294: New Feature - When sending a job from the PTP Client to the XRn the copy project is now available. The master disc can now be read from any drive on the client computer. 295: New Feature - You may now select a local optical drive to read in a master disc for use in a GI projects. 297: New Feature: Archive and Run - When sending jobs to an XRn and choosing to Archive the job you can now automatically run that job after it has been archived. 343: New Feature: Multiple Robots from PTPublisher - You may now send jobs to multiple robots attached to the local PC. Use the Change Robots link in the robot status panel in the left navigation window. For more information see the Multiple Robots section of the help file included with PTPublisher. 313: New Feature - Pregaps are now editable for Audio Projects. 213: Bug Fix - Copying DVD-R master to DVD+R discs or vice versa now works. 229: New Feature - When sending jobs to an XRn the Sending Job dialog now displays the job title. 235: Open File dialog sometimes opens underneath - also opens multiple windows. Bug Fix - When opening the file open dialog for prints or data it will no longer appear under other windows. It is now a modal dialog which means you can no longer drag files from this window to the main PTP application. You can still drag files they just need to be dragged from a Windows file dialog. 236: When editing jpg file through edit file button in PTP opens with gray box in front. Bug Fix - The gray box no longer appears when editing a JPG or other image file using the edit button. 238: New Feature - You may choose to burn only to the top or bottom drive on a Disc Publisher XRP or Pro. 65: Bug Fix - Will now burn files with czech diacritics in name or path. 183: Bug Fix - Software will now check for available disc space on hard drive when builing image file. 204: New Feature: Many logging improvements were added: Better logging of many errors; improved view and filtering options; add error, job start and job end icons, ability to view other logs by adding xml key - Add True under . 264: New Feature - Disc copy improvements. You can now choose the reader drive for Disc Copy jobs or Images jobs from the drop down menu. As soon as the drive is closed PTP will automatically search for media. The last drive used will automaticaly be searched for media the next time a Copy Job or Image job is performed. 267: In PTPublsiher on Vista on the file open dialog clicking the search button causes crash. Bug Fix - PTP no longer crashes on Vista when the Search button in the file open dialog is pressed. 252: Bug Fix - The drive info screen now correctly displays disc info for BDR and DVD DL as well as CD and DVD. 253: When PTP does not find drive it displays the Calibration Utility PTP will now display the following error for Bravo II, SE and XR: Unable to initialize Job Manager (Invalid Drive) Application will close. If drives are not found for XRP or Pro, the calibration utility is still displayed. 255: Automatically sets burn speed to 4x on business card discs to reduced disc rejection errors. 260: Bug Fix - When adding data to a job, PTP now correctly determines the amount of available space on a BDR or BDR DL Disc. 325: Splash screen now displays currently loading component. 328:New Feature - Added Run Job after archiving check box when sending jobs to the XRn. 277: PTPublisher does not handle merge prints with CSV file. Prints all records on first disc. Bug Fix - SureThing Merge files with a referenced data file now work. Merge information will nopw display in Preview. Must install SureThing 5.0.588 or later for these to be fixed. 315: New Feature - You may now preview audio tracks in an audio job by clicking the preview icon. 312: Bug Fix - Status screen now displays both drives in a two drive robot. 289: PTP now performs check at start up to check for mismatched burn engine software vs system px burn engine files. 293: New Feaature - Bin Selection. You can now designate left and right bins with a specific media type in any Publisher. 376: Bug Fix - Audio Track total time does not refresh after tracks are deleted. The total disc time now refreshes each time audio tracks are added or deleted. 000: Updated PTPublisher html Help to reflect new features - Now displays properly in Firefox. 000: Bug Fix - PTPublisher crashes as soon as the Disc Publsiher is about to print the label on the disc SureThing 5.0 Deluxe was updated to version 5.0.588 or higher causing a conflict - This has been fixed. 000: Burn Engine Update to 4.02.62.500 000: Improved handicap accessibility by correcting tab order or adding tab accessibility to most options. Release Notes - PTPublisher: Version 1.1.0 _____________________________________________________________ 209: Bug - Opening help html automatically opens Intenet Explorer Fixed: Now opens with browser set as default in Windows. 202: Bug - BravoPro status Screen inconsistences Fixed: Status Screen now dispays two drives and the correct BravoPro images. 220: Bug - Adding wav files to audio job causes incorrect error messages that files are not formated correctly Fixed: Now only displays messages for improperly formated wav or mp3 files. 250: Bug - UI Aligment Issues and Updates Fixed allignment issues on some dialogs Added new product images/icons 216: Bug - Cannot edit Volume Name in DVD Video job Added Volume Name field to Step 1 of DVD Video job. 222: Feature - Add burning status text to burn progress bar Burn status bar now displays the current activity of the burner,initializing, burning, testing, verifying, and Finalizing. 247: Feature - Added Polish Language Strings 248: Feature - Added Network ability for XRn Only (PTPublisher ne version only) Added Network Robot Searching Added Change Robot Dialog Added Archive Job for XRn only 249: Feature - Add Windows Vista color schemes Access this feature by clicking the Tool Menu - Color Scheme. Blue, Black and Silver are available. Release Notes - PTPublisher: Version 1.0.3 ______________________________________________________________ 182: Feature - Add different size total capacity data bars for each of the disc types. Add different size total capacity data bars for each of the disc types. 184: Feature - Add Hot Keys Added hot keys for better navigation. For key combinations open any of the menus. Items with hot keys have the key combination in parenthesis. 193: Feature - In PTCalibration Utility, add support for XR, XRP, and BravoPro. 166: Feature - Double-click on SureThing Image should open image for editing Double clicking on the Surething image will launch SureThing with the selected label. 190: Feature: Add Support for BravoPro, XR and XRP Support for Disc Publisher PRO, XR and XRP was added. 157: Feature - There is no option for Mode1 and Mode2 XA in a Data job. Added an option for Mode 2 Data Discs. 194: Feature: Add Pick Depth Calibration to PTCalibration Utility Add Pick Depth Calibration to PTCalibration Utility Feature: Bravo SE Only - Add ability to use high capacity BravoPro color cartridges in a Bravo SE. (Requires Firmware and Driver update to latest version) 168: Bug - Certain Wav files can't be added to Audio Job Added a warning when audio files that don't have the following specs are added to a job: Bit Rate: 1411 kbps Audio Sample Rate: 16bit Channels: 2 (stereo) Audio Sample Rate: 44 khz 169: Bug - Drive tray does not open after successful data burn Fixed issues with drive tray not opening after rejects and other situations if conflicting DLA software is installed. 171: Bug - PTPublisher doesn't run as a User or Power User on XP Fixed issues running the software with only user privledges - Will now run as user or power user as long as "Everyone" is given Manage Printers, Manage Documents Rights for the Disc Publisher printer. 174: Bug - Adding certain types of files fails (image and audio) Fixed a bug where files without all lowercase extensions in Audio and Image jobs were not able to be added to a job. 185: Bug - Tech Support Report not saving all log files for PTPublisher Fixed a bug in the tech support report that prevented the report from getting the latest log files. 189: Bug - Test Burn is actually burning to DVD-R instead of testing. Fixed with updated 3.6.36.500 burn engine 144: Bug - Media should change to custom when changing print quality. Media now automatically changes to custom if any print setting is changed on step two of the job wizard. 145: Bug - With no robot connected - get unknown error when clicking copy jobs. Fixed a bug where the user received an unknown error when clicking copy job with no robot connected. 151: Bug - If user adds too much data to Data Job no warning or message is logged. Added warning if user hads to much data to a data job based on the disc type they have currently set. Error now appears in the log. 152: Bug - Calbration utility does not launch from PTPublisher - DevComponents.DotNetBar.dll did not install. Fixed a bug that caused the calibration utility to fail to launch. 154: Better Logging Improved logging messages of job and disc info, switched order of completed jobs to show latest jobs first. 155: Bug - can't copy Blu-ray discs Fixed a bug where BD-R discs were not able to be copied. 161: Bug - Problems opening and closing discs in Audio Job. All discs are open which may cause some older players not to play discs. Fixed a bug where audio jobs weren't being closed. 164: Bug - Crash after robot unplugged and clicking Cancel Fixed crash after robot unplugged and clicking Cancel 165: Bug - Abort job action not clearing any remaining robotic error. When a job causes a robotic error and is aborted then the robotic error will be cleared. 114: Bug - Prompt for insufficient Resolution on Print step must be dismissed twice. Fixed a bug that caused 2 of the same warning messages on image (jpg, bmp) files that are either not square or low res. 199: Bug - Options Menu - Aplications Paths tab does not save path if custom path is used. Fixed bug that caused custom inability to save custom paths. 143: Bug - Low Ink Warning message appears at start of many disc job Added warning that informs used that they may not have enough ink to complete the job. Can now ignore or change cartridge. Bug- Various recording errors during DVD recording jobs. Updated burn engine to version 3.6.36.500 to fix DVD recording errors. Release Notes - PTPublisher: Version 1.0.2 ___________________________________________________________________ 3: Calibration Utility Added a calibration utility that is launched from the Printer Properties page. This is used to set bin positions, center the print image, run last disc calibration, etc. 10: Allow PTP to launch if no robot is found PTPublisher will now open even if no robot is found. This allows the user to create/modify/save jobs without a robot connected. 11: Job Queuing Added job queueing feature which allows the user to queue up multiple jobs at a time. 76: Audio Copy job - doesn't "find" disc to copy if the disc has already been inserted Bug Fix: When performing a copy job of an audio CD the first step would display a "Checking for disc in drive" message indefinitely. 61: Add Kiosk Mode check box in PTPublisher Options Added a kiosk mode option when the robot supports kiosk mode (Disc Publisher II). The option can be found on the options tab under the Tools - Options menu. 64: Disc Type not saved with job Bug Fix: Disc type was not always saved with the job. 18: Cannot add .ISO files in PTPublisher PTPublisher can now burn ISO image files. 37: Launching explorer dialog is slow Explorer Dialog (Get Files) will now load faster. Also fixed some display and color theme issues. 4: VISTA Fix PTPublisher now works with Microsoft Windows Vista. 9: Volume name not saved with job Bug Fix: The volume name was not displayed when opening a saved job. 1: 800x600 Resolution Bug Fix: When monitor resolution was set to 800x600 certain windows and buttons where not fully accessible. 2: Clean Print Issue Bug Fix: After doing a Clean Print, the software would not allow any more jobs until restarted. 29: Blu-Ray capacity incorrect Bug Fix: User interface bugs regarding Blu-Ray disc capacity and job types.