Primera - Bravo - Drivers

Bravo Printer Drivers

For Windows 2000 and Windows XP:
Bravo Printer Driver, version 1.30
Use this driver if you are installing the Bravo for the first time. Once you have downloaded the driver by clicking on the link below, double click on Bravo_130.exe to extract the driver install files. Next, turn on the Bravo and connect the USB cable. Windows will automatically detect Bravo and attempt to install the driver. Follow the Driver Install Wizard instructions. When prompted for the location of the driver, browse to the location of the extracted files.
Macintosh OS X Version 10.2 or higher

Bravo Printer Driver for Macintosh OS X v.10.2 or higher

NOTE: If your Bravo has a serial number of 2030200890 or lower, you will need to replace the EEPROM chip and upgrade your firmware in order to successfully operate under Mac OS X. If you need this chip, please contact Technical Support.

Determining Driver Versions
Perform the following steps to identify the Primera Printer Driver version installed on your system:
  • Click Start, then Printers and Faxes
  • Double-click the icon for the appropriate printer
  • Click Printer and select Properties from the drop-down menu
  • Click the Device Settings tab. Right-click on the printer icon and select About.
  • A driver information box will be displayed. The driver version is listed at the bottom of the dialog box
Need help? Visit our Windows Driver Upgrade Guide
Back to Primera Printer Drivers